Model : Bold, Curve, 8300, 8310, 8320, 8800, 8820, 9000

Warning! The Wireless Mode MUST BE OFF before performing the given SIM Unlock instructions in order to avoid causing the device from becoming defective.

How to turn Wireless Mode Off:

1. Scroll to the Airplane Icon (Turn Wireless Off.)
2. Press Select.
3. Wireless Mode will turn off.

Unlock Instructions:

Please ensure you do not have any SIM inserted while performing this set of instructions.

1. Go to settings.
2. Go to options.
3. Go to advanced options.
4. Go to sim card.
4. Hold the ALT Key while typing in MEPE or MEPD or MEPPE or MEPPD ( not case sensitive )
( you will not see text appear on screen while typing ).
5. It will say “Enter Network MEP Code, then you type in the unlock code, press in the trackball to confirm.
6. Your phone is now unlocked.

Model : BlackBery Storm (9500)

1. Insert any sim card
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keyboard
7. Enter mepd (you will not be able to see the typed info)
8. Enter mep2
9. Now it will say enter network mep code

Model : BlackBerry 8700

Go to the Menu -> Options -> Advanced Options -> Sim card press select, while holding the Shift key
(bottom right corner CAPS), type mepd. You should now see the five locking categories listed, while holding the alt key, type mep2. Release the alt key. You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked.

Model : BlackBerry 8800

***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****

1 – Go to settings menu => and then Options
2 – Select Advanced options => and then Sim card
3 – Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4 – Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
5 – You should be presented with a prompt “Enter Network MEP Code”. Type in the 16 digit unlock code received from UnlockBase.com and press in the track wheel / jog dial to confirm
6 – Your phone is now unlocked

Model : BlackBerry 8100 Pearl

1 – Go to Options Menu => Advanced Options
2 – In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
3 – You’ll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2
4 – Enter the unlock code.

———

Model : BlackBerry 8100 (Vodafone Australia)

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS

This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below

1. Take note of the unlocking code shown above

2. Insert a Non-Vodafone Australia working SIM card.

3. Ensure the phone is charged and then switch the phone on.

4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)

5. The phone will then display a message. The most common is “Invalid SIM card”. (Different message? See FAQ below)

6. Select “Turn Wireless Off”

7. Select “Settings” Menu , then go to Advanced Options > SIM Card

8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}

9. When prompted with “Enter Network MEP code (255 left)” on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above)

10. Reset the phone by pulling the battery

11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)

Please Note:

If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.

To unblock the phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.

FAQ:

Question: My phone asks to enter a PIN number

Answer: For SIM cards with PIN ENBLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.

Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card.

Answer: The most common message the phone will display is “Invalid SIM card”. Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards – The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display “Insert SIM” “Bad Card”, “Card Error” or “Card Rejected”, confirm the SIM card is inserted correctly – Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.

Question: I am outside of Australia and experiencing difficulties unlocking the phone that I purchased from a Vodafone Australia outlet

Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.

——————–

Model : All BlackBerry

1 – Using the menu go to Settings Menu -> SIM card pressselect.
2 – While holding the SHIFT key, type mepd
3 – You should now see the five locking categories listed.
4 – While holding the SHIFT KEY, type mep2.
5 – Release the shift key.
6 – You are now prompted to enter the Network MEP code (it will also state how many attempts left)
7 – Enter the code
8 – Enter Return/Enter
9 – The device should then be unlocked

For other Blackberry phone models please follow instructions below:

Warning! The Wireless Mode MUST BE OFF before performing the given SIM Unlock instructions in order to avoid causing the device from becoming defective.

How to turn Wireless Mode Off:

1. Scroll to the Airplane Icon (Turn Wireless Off.)
2. Press Select.
3. Wireless Mode will turn off.

How to SIM Unlock the device:

1. Go to the “Options” screen
2. Select the “SIM Card” option
3. Type ALT-MEPD (hold ALT key while typing the 4
letters, M-E-P-D)
4. Release the ALT key, it should then display a list
“SIM, Network, Network Subset, etc…”
5. To select “Network” type ALT-MEPE (since E is the
key that gives 2 when shifted)
6. Release the ALT key, it should then ask for the
code
7. Enter the unlock code provided.

Note: In case of difficulties when entering the code please try the alternative instructions below:

Alternative Instructions how to enter the unlock code.

***** You must have a SIM card in your phone to complete these steps. We recommend to use the SIM card that your phone is currently working with *****

1.  go to settings

2   go to options

3.  go to advanced options

4.  go to sim card

5.  Type MEPD (not case sensitive) ( you will not see text appear on screen while typing )

6.  Does it say Network active?  if so your phone is locked

7.  Hold the ALT Key while typing in MEPE ( not case sensitive )  ( you will not see text appear on screen while typing )

8.  It will say “Enter Network MEP Code, then you type in the 16 digit unlock code, press in the jog dial to confirm

Your phone is now unlocked

Popular Posts
Tagged with:  

Comments are closed.